Temperature controller

Thermal stabilization unit TCM3.

The unit is designed for thermal stabilization by Peltier elements. The thermal stabilization is done through PWM. The device has 2 channels configured for cooling and 1 channel configured for heating.

Cooling outputs are designed for connecting a Peltier element with 12V operating voltage. as well as connecting a resistor for a heating channel. Typical connection diagram is shown in Fig. 1


Technical specification
Max fundamental permissible error of measurement ±1%
Heat probe type EPCOS NTC thermistor, grading 8016
Polling interval for input signals 100ms
Active transistor output (cooling) 12V/6A
Active transistor output (heating) 12V/3A
Output signal type PWM
Fan control output 3 independent channels, Max 300mA
Tachometer fan input 4 channels
RS-485 transmission protocol MODBUS-RTU
Baud rate 9600 bps
The number of transmitter-receivers in the line 256
Galvanic insulation voltage 2kV
Supply voltage 90-250V
Max input power 300 VA
Max device dimensions 260 × 180 × 105mm
Max weight 2kg
Ambient air temperature 10 … 45°C
Average lifetime 10 years
.
You may also be interested in
Electrooptic modulator driver

Electrooptical switch driver is designed to control DKDP Pockels cells (for instance, Pockels cells by EKSMA). Technical specification: High voltage output for cell control 6kV Max frequency 10kHz Control pulse drop time 15ns Part number: EOMDRV-1

Gynecological handpiece

The piece is designed for gynecology treatments and locks up onto a standard scanner. It is as a detachable accessory that can be repeatedly subject to autoclaving, disinfection and sterilization prescribed in the operaion manual. Optional item.

Motorized linear stage

Motorized linear stages feature a screw drive with 0.5mm pitch, and a small footprint, but reliable design. The base and moving platform of the translator are made of anodized aluminum, while the working parts are made of hardened steel. Motorized stages are fitted with an encoder that allows for control of the translator’s position and jamming detection. The reference position is set by the end stops. The […]

Temperature controller

Thermal stabilization unit TCM3. The unit is designed for thermal stabilization by Peltier elements. The thermal stabilization is done through PWM. The device has 2 channels configured for cooling and 1 channel configured for heating. Cooling outputs are designed for connecting a Peltier element with 12V operating voltage. as well as connecting a resistor for a heating […]

Have a question?
Сообщение успешно отправлено!

×