Digital merging board (IEC 61850)

The digital integrating board (DIB) converts digital LVDS inputs into the IEC 61850 data that enters the Ethernet using the IEC 62439-3 (Parallel Redundancy Protocol or High Availability Seamless Redundancy Protocol).

The data are shown as sample values (SV) according to IEC 61850-9-2LE. The data then can be directly used by measurement controllers and/or protection devices that support the protocol.

Time synchronization is done through the IEC 61588 PTP or 1PPS signal. Both provide for accuracy required for publication of sample values according to 61850-9-2LE.

The DIB has been tested as part of a merging unit to receive and digitize signals from an optical current and voltage transformer. The DIB can be easily integrated in any other electronic devices supporting IEC 61850.




Technical specification
.
You may also be interested in
Gain module DPSS 1925nm

Tm:YAP laser gain module with continuous or pulsed diode pumping. The laser gain module is designed for solid state laser systems for a wide range of application. The product scope includes both pulsed and continuous laser gain modules. The systems are liquid-cooled.

Temperature controller

Thermal stabilization unit TCM3. The unit is designed for thermal stabilization by Peltier elements. The thermal stabilization is done through PWM. The device has 2 channels configured for cooling and 1 channel configured for heating. Cooling outputs are designed for connecting a Peltier element with 12V operating voltage. as well as connecting a resistor for a heating […]

Gain module DPSS 1064nm

Nd:YAG laser gain module with continuous or pulsed diode pumping. The laser gain module is designed for solid state laser systems for a wide range of application. The product scope includes both pulsed and continuous laser gain modules. The systems are liquid-cooled.

Condenser

The condenser is designed for laser-out-of-fiber settings systems. Condenser is fitted with a SMA-905 connector adjustable by 2 axes. The condenser has a hole with a retaining ring to attach 1/2 inch lenses. Material: Aluminum, duralumin. Code: CND-1M-SMA905

Have a question?
Сообщение успешно отправлено!

×