DPSS CW module 1064, 532, 808nm

Solid state quasi-continuous laser system, with 808nm diode-pumping for Nd:YAG (1064nm) and second harmonic generation using KTP crystal (532nm), Q-Switch at 1064nm and 532nm.

Application: Medical, Aesthetics, industrial.

Overview: The module is designed to generate continuous laser at one of the two wavelengths depending on a setting selected. The laser module is mounted in a metal (aluminum) body. The system features diode pumping (808nm) and active wavelength generation crystals: Nd:YAG (1064nm) and Ho:KTP (532nm). The switching between the wavelengths is provided via optical mechanics inside the module. The cooling media is air or flowing water, closed circuit. The module is completed with Peltier elements to ensure selected temperature for several components of the system. There are temperature sensor outputs inside the module to monitor system’s components. The switching between the wavelengths is done by moving optical components that are controlled through step motor outputs. The optomechanical motors are furnished with encoders for movement and exact position control. The module is complete with a SMA-905 optical fiber output for a 600 micron fiber.

The module comes in 4 different packages:
1) Laser module; driver controller RS485/USB; pumping power supply.
2) Laser module w/o driver controller (pumping control and power supply, thermal stabilization, switching of wavelengths is ensured by customer).
3) Fiber or optical output.
4) Optional liquid or air cooling.

The module may also be designed and packaged according to customer technical specification.

Technical specification
Description Parameters
Wave length, nm 1064 808 532
Operation mode Q-switched Continuous wave Q-switched
Max pulse energy, mJ (Q-switched) 1 1
Pulse length (Q-switched), ns 20-200 20-200
Pulse repetition rate, Hz 30000 15000
Max pulse energy, J (CW) 9(100ms), 90(1s)
Pulse length (continuous wave), ms 10-∞
Interpulse length (continuous wave), ms No less than 10
Pulse repetition rate (continuous wave), Hz No more than 50
Average power output, max, W 30 90 15
Q-switch mode: Switching mode Active acoustooptic Active acoustooptic
Cooling Air or liquid
Optical output Fiber 600 micron SMA-905 or optical output
Operating range +16 ÷ +30 °С
Transportation and storage temperature -25 ÷ +50 °С
You may also be interested in
EVLA adaptor

The adapter is used with disposable fiber wire for EVLA treatment. The accessory comes with an adapter itself plus disposable fiber EVLA tips. The fiber tip is furnished with a diffuser to provide a radial light beam for EVLA. Optional item.

Magic ONE

The single wave diode 810nm laser system is specifically designed for hair removal. The system comprises of a laser diode handpiece with a cooled tip (down to -4°C), main unit with electronics and cooling system, a touch screen and intuitibe interface. To facilitate easier use, the device features preset parameters. Operator can also save custom […]


Magic Super – power and efficiency of pulsed laser technology. This is a pulsed laser system designed to ramp up such procedures as rejuvenation, hair and tattoo removal. Nanosecond pulses and Q-switch technology make it ideal to go for widest range colors and deepest pigmentation. The system comes with 1.2, 2, and 6mm handpieces, a 30mm […]

Have a question?
Сообщение успешно отправлено!